Aluminum Flywheelcages


Technical description

 

The Dr.Snikkas Flywheel Cage is a performance enhancing part for Nerf Flywheelblasters.

You can expect improved accuracy with modded, and stock, blasters!

Also, the specially developed flywheels for this cage help to improve accuracy, give the cage almost no vibration, and are designed to lower dart wear while increasing friction for better dart velocity.

The massive accuracy improvement comes from the angled position of the flywheels. This will impart a spin to the dart along its long axis.

This spin serves to gyroscopically stabilize the Dart by improving its aerodynamic stability and accuracy.

Unlike stock flywheels, the Dr.S flywheels contact, and enclose, ~75% of the dart with its special concave shape. Because of this concave groove, the flywheels can achieve more friction without wearing the dart out faster.

More friction = More power transferred to the Dart.

 

Also the low deformation of the Dart while acceleration helps to decrease the turbulences.


Aluminum FWC "RS/ST" High Crush! Gen3,1

CNC machined Aluminum Flywheelcage

suitable for Nerf Rapidstrike, Stryfe and the CAM Blaster.

Totally NEW especially designed for "neodynium magnet motors" (like, MTB NEO Rhino/Hellcat)!

 

Features:

 

- 39mm Flywheel diameter! eliptical shaped for maxed out fps, and to prevent Damage to the motor.

- The special shaped Flywheels take the most of the impact energy while acellerating the Dart.

- New material for the High Crush Flywheels. It has the lagrest impact resistance and toughness for acetal materials on the market.

- Dart guide with large Diameter to prevent Jams.

- Tested with MTB Rhino´s & Hellcats, Reaches at 3S up to 195 fps²!

- Adjustable Crush! 39, 40, 41 mm. Crush can be adjusted with the motor mounting Position.

- Olscool DRS Logo

 

 

 

 

The Set contains:

1x Flywheelcage

2x CNC machined Acetal Flywheels

4x M2 screw

 

²: With MTB Rhino @ 3S Lipo and highest crush setting. Normal is betwen 170-180 fps. some High readings reached around 195 fps.

Aluminum Flywheelcage suitable for Nerf Rapidstrike, Stryfe and the CAM Blaster.

65,00 €

  • Available / Verfügbar
  • Ready for shipping in 1-7 Days / Lieferbar in 1 - 7 Tagen1

Aluminum FWC "HYFI" High Crush! Gen3,1

CNC machined Aluminum Flywheelcage

suitable for Nerf Hyperfire & Regulator.

Totally NEW especially designed for "neodynium magnet motors" (like, MTB NEO Rhino/Hellcat)!

 

Features:

 

- 39mm Flywheel diameter! eliptical shaped for maxed out fps, and to prevent Damage to the motor.

- The special shaped Flywheels take the most of the impact energy while acellerating the Dart.

- New material for the High Crush Flywheels. It has the lagrest impact resistance and toughness for acetal materials on the market.

- Dart guide with large Diameter to prevent Jams.

- Tested with MTB Rhino´s & Hellcats, Reaches at 3S up to 195 fps!

- Olscool DRS Logo

 

 

 

The Set contains:

1x Flywheelcage

2x CNC machined Acetal Flywheels

4x M2 screw

 

Aluminum Flywheelcage suitable for Nerf Rapidstrike, Stryfe and the CAM Blaster.

65,00 €

  • Limited quantity in stock / nur noch begrenzte Anzahl vorhanden
  • Ready for shipping in 1-7 Days / Lieferbar in 1 - 7 Tagen1

Aluminum FWC "RS/ST" Gen3.1

CNC machined Aluminum Flywheelcage

suitable for Nerf Rapidstrike, Stryfe and the CAM Blaster.

NOW BACK! caused by high requests I´ve buildt the original Gen3 FWC again!

 

Changes:

3"long brass pipe goes through the whole FWC

Additional holes with M4 Tap to easy pop of the Flywheels from the back.

The Rest stays as the original FWC From 2016!

 

 

The Set contains:

1x Flywheelcage

2x CNC machined Acetal Flywheels

4x M2 screw

 

Aluminum Flywheelcage suitable for Nerf Rapidstrike, Stryfe and the CAM Blaster.

65,00 €

  • Sold out / Leider ausverkauft

Aluminum FWC "RV" Gen 3.1

CNC machined Aluminum Flywheelcage

suitable for Nerf Rayven.

NOW BACK! caused by high requests I´ve buildt the original Gen3 FWC again!

 

Changes:

3"long brass pipe goes through the whole FWC

Additional holes with M4 Tap to easy pop of the Flywheels from the back.

The Rest stays as the original FWC From 2016!

 

 

 

The Set contains:

1x Flywheelcage

2x CNC machined Acetal Flywheels

4x M2 screw

 

Aluminum Flywheelcage suitable for Nerf Rayven.

65,00 €

  • Sold out / Leider ausverkauft

Aluminum FWC "HYFI" Gen3.1

CNC machined Aluminum Flywheelcage

suitable for Nerf Elite Hyperfire.

 

BACK IN STOCK SOON!

 

The Set contains:

1x Flywheelcage

2x CNC machined Acetal Flywheels

4x M2 screw

2x Silicone shock absorber

 

Aluminum Flywheelcage suitable for Nerf Elite Hyperfire.

65,00 €

  • Sold out / Leider ausverkauft

Aluminum FWC "DEMO" Gen 4.0

CNC machined Aluminum Flywheelcage

suitable for Nerf Demolisher² and Modulus.

new version Gen 4.0 !

 

Changes:

Additional holes to easy pop of the Flywheels from the back.

New lightweight design.

Optimized Dart guide.

  

The Set contains:

1x Flywheelcage

2x CNC machined Acetal Flywheels

4x M2 screw

2x Silicone shock absorber

 

² Shell of Blaster must be modified to fit Motors!

Aluminum Flywheelcage suitable for Nerf Demolisher and Modulus.

65,00 €

  • Limited quantity in stock / nur noch begrenzte Anzahl vorhanden
  • Ready for shipping in 1-7 Days / Lieferbar in 1 - 7 Tagen1